Guide forLovec Radar
Requirements
Installation Steps
Lovec Radar loader — download
DOWNLOAD THE LOVEC RADAR LOADER 📥 https://e.pcloud.link/publink/show?code=kZCUr3ZNiHIWblunW41oPyoBrkdpHz4MQu7 This is the collector loader: it activates your key and reads raid data to feed the web map. The map itself opens in your browser at https://lovec-radar.xyz — there is no in-game overlay. ⚠️ Disable your antivirus and Windows Defender first, and only then download and unzip the archive — otherwise the antivirus will delete the file on a false positive.
Prepare your system (mandatory)
90% of «it does not start» cases are a running Windows Defender or antivirus. Spend 5 minutes: 1. Fully disable Windows Defender (real-time protection) — the DControl utility makes this easy. 2. Uninstall third-party antivirus software (Kaspersky, Avast, ESET, 360 Total Security) — they block the loader. 3. Turn off Core Isolation → Memory Integrity and Reputation-based protection. With memory integrity on, the loader cannot read game data. 4. Disable Hyper-V and anything that loads a hypervisor (VMware, VirtualBox, WSL2, Docker Desktop, Windows Sandbox). ℹ️ You normally do not need to touch the BIOS for Lovec Radar. ⚠️ After a reboot Windows may re-enable real-time protection on its own — disable it again or add the loader folder to exclusions.
Move the loader to a USB drive
The loader must run from the USB drive ONLY. 1. Copy the unpacked loader to a USB flash drive. 2. Delete every copy from the PC: Downloads, Desktop, the unpacked archive — then empty the Recycle Bin. 3. Plug the drive directly into a USB port, not through a hub. ⚠️ If even one copy stays on the PC, the loader throws Bad HWID and will not start.
Run the loader and enter your key
1. Run the loader from the USB drive as administrator. 2. If Windows shows the blue «Windows protected your PC» dialog — click «More info» → «Run anyway». That is the standard warning for unsigned programs. 3. Enter the activation key from the email sent after payment. 4. Wait for a status line like «Connected» / «Waiting for game». ⚠️ Do not close the loader window — it must stay open for the whole raid. If the loader closed instantly or showed an error, see «Troubleshooting» and do not launch a second instance on top of the first.
Launch Escape From Tarkov
Start the game through Steam or the BSG launcher and wait for the main menu to fully load — about 30 seconds. The window mode does not matter: fullscreen, borderless and windowed all work.
Open the map in your browser: lovec-radar.xyz
OPEN THE RADAR 🗺️ https://lovec-radar.xyz 1. Open the link in a browser — on your PC, a second monitor, a tablet or a phone. 2. Enter your character's in-game nickname exactly as in game: same letters, same case, no extra spaces. 3. Press «Open session». ⚠️ This is the character nickname, not your account login, e-mail or launcher name. A wrong nickname = empty map. 💡 Tip: open the map on a phone or second monitor — it stays out of your stream capture and is always at hand.
Enter a raid — the map comes alive
Start a raid as usual: pick a map and mode, wait for the location to load. Once you are inside the raid, players, loot, quests and extracts appear on the web map by themselves. ℹ️ In the main menu and during loading the map is empty — that is normal, data only flows inside a raid. Keep the loader window and the site tab open for the whole raid. Nothing needs restarting for the next raid — the map refreshes itself.
How to use the radar
Layers and map. The layer panel toggles players, loot, quests, exfils, hazards, corpses and switches. The map can follow you or a selected target, pan freely with the mouse and zoom with the wheel; the «Fit» and «Center» buttons snap the view back. Height markers show who is above, below or on your level. Loot filter. Set a minimum price and a source (flea / trader / best price), enable quest and important loot, wishlist and hideout items. Value colors and «name / price / both» labels are configurable. Individual items can get show / notify / hide rules. Quests. The planner shows active tasks, quest items and zones on the map plus hand-in hints (bring / found-in-raid). Sharing. Give a teammate the session link and ask them to enter the collector nickname — they join the same map in their own browser. Every viewer keeps their own filters and viewpoint; the «Log out» button leaves the session.
Risks and an honest warning
Escape From Tarkov is protected by BattlEye, and ban decisions are made by Battlestate Games — including from reports and manual review during ban waves. Lovec Radar is a tool with a clear risk profile, not a safety guarantee. • Do not sweep every expensive loot spot alone in plain sight. • Keep the map on a separate device if you stream. • Check the current product status on the product card before every launch.
Troubleshooting
Fully disable Windows Defender and your antivirus, uninstall third-party antivirus software. Turn off Core Isolation → Memory Integrity and Hyper-V. Install the Visual C++ Redistributable and DirectX. Run the loader from the USB drive as administrator.
Check that the nickname on the site matches the game exactly — case-sensitive, no spaces, and it must be the character nickname, not the account login. Make sure the loader window is open and shows «Connected». Log out of the session and log back in with the correct nickname.
Data only flows inside a raid — load into a location. The map is empty in the main menu and during loading, which is normal.
Usually copies of the loader are still on the PC — delete them from Downloads, Desktop and the Recycle Bin, and run it from the USB drive only. If there are no copies left, it is a HWID binding or key expiry issue — contact support for a reset.
That can be the anti-cheat or the antivirus. Close the game completely, disable Defender/antivirus again and add the loader folder to exclusions, then run the loader from the USB drive as administrator and only after that start the game.
A 1–2 second delay is normal for a web radar. If it is more: close extra tabs, check your connection, turn off the VPN, refresh the page (F5). On a phone use Wi-Fi rather than mobile data.
The collector detects the location automatically. If the map did not change after a new raid — refresh the page (F5). Make sure only one session with one nickname is open.
Plug the drive directly into a USB port (not through a hub) and check that it opens in Explorer. Launch the loader from the drive letter of the USB stick, not from a copy on drive C.
Settings (Win+I) → «Time & language» → enable «Set time automatically» → «Sync now».
Run the loader with a VPN enabled.
Restart the PC. If that did not help — disable Hyper-V and remove anything that uses a hypervisor (VMware, VirtualBox, WSL2, Docker Desktop, Windows Sandbox). You normally do not need to touch the BIOS for Lovec Radar — if the error persists, contact support.
