Guide forMASON
Requirements
Installation Steps
System requirements for SCUM
Before launching MASON for SCUM check your PC config: - OS: Windows 10 x64 (builds 2004 / 20H2 / 21H1 / 21H2 / 22H2). Optional Win11 without guarantees. - Anti-cheat: Easy Anti-Cheat (used in SCUM). - BIOS: UEFI, system disk — GPT. - Virtualization in BIOS: VT-x / VT-d / Hyper-V — enable. Secure Boot — disable. - USB drive: mandatory, loader runs only from it. - Window mode in SCUM: «Fullscreen in window».
Configure SCUM before injection
Launch SCUM, in the video settings switch to «Fullscreen in window» (Borderless), save and close the game completely.
Download the loader to USB
Plug in a clean USB drive. Go to https://mason.orion-security.su/launcher, authenticate with the key from your Arayas-Cheats order, and save Loader.exe strictly to the USB drive, not to your PC's hard disk.
Two-stage injection via reboot
1. First run: Launch the loader from USB as administrator → select SCUM from the list on the left → «Run». Wait for the checkmark window and confirm reboot → «Yes». 2. Second run (after reboot): Open the loader from USB as admin again → select SCUM → «Run». 3. When the loader closes — remove the USB drive and immediately launch SCUM (any delay breaks the injection).
Cheat menu and saving config
After SCUM loads to the main menu, press HOME — the MASON menu opens. Saving settings: 1. Configure features in the cheat tabs. 2. Go to CONFIGURATION → click «Save config to clipboard». 3. Minimize SCUM, create an empty txt file (Notepad), paste the config with Ctrl+V, save. 4. On future launches: open txt → Ctrl+A → Ctrl+C → in cheat CONFIGURATION → «Load config from clipboard».
Support and error resolution
Official MASON error knowledge base: https://docs.google.com/document/d/1yGlugedrFyYcZmkIerPLQOd1BCboeoTIGOLe7UlECGU/edit?usp=sharing If no solution found — contact Arayas-Cheats support on Telegram.
Hotkeys
| Key | Action | Description |
|---|---|---|
| HOME | Open/close MASON menu in SCUM | — |
| Ctrl+A | Select all config in txt | — |
| Ctrl+C | Copy config | — |
| Ctrl+V | Paste config into Notepad | — |
Troubleshooting
This means the injection didn't complete properly. Reboot, redo both loader runs from USB, and be sure to remove the USB before launching SCUM.
Check: Secure Boot disabled, Hyper-V enabled, GPT disk, UEFI BIOS, antivirus and Defender off. Run as admin.
Enable «Fullscreen in window» mode. Wait 10 seconds after SCUM main menu loads. If HOME is bound elsewhere — remap in Windows.
Not mandatory, but recommended as an extra security layer for long sessions.
No, absolutely not. The MASON loader works ONLY from a USB drive. After injection, all copies on the PC must be deleted.