Guide forCLUTCH DMA RUST
Requirements
Installation Steps
Assemble and verify the DMA setup
Power off both PCs, install the DMA card in the gaming PC, and connect the Data port to the second PC. After boot, validate the card with its standard test tool before running the product.
Download the current loader
Official loader access page: https://play.clutch-solution.com Use only this verified source for the current product build. If it opens a portal or channel, choose the newest file/build carrying the product name.
Install the loader on the second PC
Extract the archive to a dedicated folder on the second PC. Do not copy DMA software to the gaming PC unless the developer explicitly requires a separate component.
Activate the key
Run the loader as administrator on the second PC, sign in or enter the key, select the product, and wait for license confirmation.
Check DMA and input device
Press Test/Connect. For aimbot, select only the actually connected input device (KmBox/PicoW/compatible). Radar/ESP may run without an input device when supported.
Launch in the correct order
Keep the loader open on the second PC, start the game on the gaming PC, and wait for the lobby. Then press Start/Load in the DMA loader and verify the radar/overlay.
Troubleshooting
Open the link in another browser without an ad blocker: https://play.clutch-solution.com If the source is temporarily unavailable, do not use a random mirror; contact Arayas support on the website.
Confirm that the file came from this guide. Open Windows Protection History, restore only this file, and exclude the dedicated product folder. Do not disable protection for the entire drive.
Check keyboard layout, spaces, and key validity, disable VPN during activation, and restart the loader as administrator. For an HWID reset, send the invoice ID and a screenshot to Arayas support on the website.
Restart the PC, extract the archive to a short ASCII-only path, install current Visual C++ Runtime and .NET Desktop Runtime, then run it as administrator again.
Check the product status on Arayas. If it is Updating, do not run an old build; wait for a working status and download the current version from the link in the download step.
