Skip to main content
Arayas
ARAYAS CHEATS

Guide forUB.GG Spoofer [Perm]

Updated: August 11, 2026·5 min read

Requirements

0 of 6 completed0%

Installation Steps

1

Compatibility check and preparation

UB.GG Spoofer (Permanent) is a permanent HWID spoofer by Mureh. Before use: - OS: Windows 10 and 11 — all versions. - Motherboards and CPUs: all supported. - Anti-cheats: works with all (FACEIT, Vanguard, EAC, BattlEye, VAC). - Games: all. - 8 GB USB drive: prepare — some games require Windows reinstall. - BIOS update: required for some games — check your motherboard vendor's latest firmware. Official Mureh manual: https://mureh.gitbook.io/mureh

Warning
The spoofer changes hardware identifiers at low level. Back up important data and create a Windows restore point first.
2

Get the spoofer and instructions

After payment contact the seller or Arayas support — you'll receive the current build and a private download link. Official Mureh documentation with up-to-date links and FAQ: https://mureh.gitbook.io/mureh Read the docs carefully before running — anti-cheat-specific notes are inside.

Important
The spoofer is unsigned — normal for private tools. SmartScreen and AV will warn.
3

Prepare the PC before spoofing

1. Fully disable Defender and third-party AV. 2. Uninstall all known anti-cheats (FACEIT, Vanguard, EasyAntiCheat, BattlEye services) via Control Panel and official tools. 3. Close all games and launchers (Steam, Riot, Epic, BattleNet). 4. If required — update BIOS from your motherboard vendor. 5. Prepare an 8 GB USB drive for possible Windows reinstall.

4

Run the spoofer and spoof

1. Run the spoofer as administrator. 2. Enter the seller key in the activation field. 3. Follow the prompts — the spoofer goes through several stages: SMBIOS / disk / NIC / registry change. 4. Press Y/N when asked (details in the Mureh docs). 5. The PC reboots automatically after spoofing. 6. After reboot you can launch the game on a banned account — hardware is now 'new'.

5

If a Windows reinstall is required

For some anti-cheats (especially Vanguard and FACEIT) permanent spoofing requires a clean Windows reinstall. 1. Create install media via Microsoft Media Creation Tool (Windows 10/11). 2. Back up important data to another drive or cloud. 3. Reinstall Windows before running the spoofer (or after — per seller instructions). 4. Run the spoofer again on the fresh OS and finish. 5. Only then install the game and anti-cheat.

Tip
Clean Windows + current BIOS + spoof = highest chance of clearing any HWID ban. For help — contact Arayas support or the seller.

Hotkeys

KeyActionDescription
YConfirm spoofer step—
NSkip step—
ENTERContinue spoofing process—

Troubleshooting

Yes, UB.GG permanent spoofer supports all motherboards and CPUs (Intel/AMD).

Required for some games (Valorant with Vanguard, FACEIT CS2 servers). Not always for others. Ask the seller about your specific game.

Required for some games. Download the latest BIOS from your motherboard vendor and flash it before spoofing.

Fully disable Defender and AV. Run as administrator only. If the error persists — contact the seller.

This means anti-cheat residues remained. Uninstall via the official tool, reinstall Windows if needed, and re-run the spoofer.

Ready to get started?