Skip to main content
Arayas
ARAYAS CHEATS

Guide forClassify

Updated: August 11, 2026·5 min read

Requirements

0 of 6 completed0%

Installation Steps

1

Classify Vision system preparation

Carefully follow each step: - Disable Windows Defender (fully, via Group Policy or Security Settings). - Install Visual C++ Redistributable and Runtimes (all versions, x86 + x64). - Install DirectX (latest End-User Runtime). - Disable Secure Boot in BIOS — critical for Classify to launch. - Download required DLLs from the developer's link and place them into C:\Windows\System32. - Close overlays and third-party anti-cheats (FaceIt AC, GameGuard, etc.).

Warning
Without disabling Secure Boot, Classify will not start. It's a driver requirement, no workaround.
2

Downloading the loader and Virtual Pet

Use only official links: - Loader: https://classify.orion-security.pro/launcher - Virtual Pet: link from the developer (on the instruction page). - Copy your purchased key from the order email. - Transfer the loader to a USB flash drive (run only from USB!). - Extract Virtual Pet to the desktop. - Loader size ~10–20 MB, Virtual Pet ~30–50 MB.

Important
The loader MUST be launched from a USB flash drive, not from disk. Anti-cheat requirement.
3

Loader launch and reboot

Activation and initial launch: - Run the loader from USB as Administrator. - Enter your key. - A reboot prompt will appear — click Yes and wait for restart. - After reboot, run Virtual Pet as Administrator. - Accept the agreement, click I Accept → Next. - Uncheck Auto-start, keep Always on top, click Start. - In tray, right-click Virtual Pet → Settings → uncheck Stay on top in fullscreen.

Tip
Strict order: loader → reboot → Virtual Pet → tray setup. Don't skip.
4

Re-running the loader and injecting for PUBG

Final cheat launch: - After clicking Start in Virtual Pet, run the loader from USB again. - A prompt to remove USB will appear — first remove the USB, THEN click OK. - After all dialogs, launch PUBG. - Wait for the main menu (~1–2 minutes).

Important
Remove USB BEFORE clicking OK — otherwise the cheat won't load properly.
5

Using the cheat in-game

After PUBG fully loads: - The cheat works via Virtual Pet ESP overlay on top of the game. - If ESP disappears when minimizing the game — open tray (without minimizing), double-click Virtual Pet icon and return to game. - Configure ESP via the Virtual Pet interface. - Save the config if needed.

Tip
ESP is an external overlay running on top of the game via Virtual Pet. Anti-cheat doesn't see it as an inject.

Hotkeys

KeyActionDescription
INSERTOpen Virtual Pet settings—
F4Toggle ESP—
F5Reload ESP overlay—
DELETEClose Virtual Pet—

Troubleshooting

Verify USB works and is readable in Explorer. Run loader specifically as Administrator. If AV still blocks — fully disable it and retry.

Enter BIOS/UEFI (usually DEL or F2 on boot), find Boot or Security section, set Secure Boot to Disabled, save and reboot. On some laptops you must set a supervisor password first.

Open the system tray (without minimizing via Win+D), double-click Virtual Pet icon — this brings the overlay back on top.

Verify Defender is disabled, Visual C++ is installed, DirectX is updated, Secure Boot is off, USB was removed BEFORE clicking OK in the loader.

By-design anti-share protection. Keep the loader only on USB and run before each session.

Contact Arayas Cheats support through the chat on arayas-cheats.com.

Ready to get started?